Installation

Element


Default mapping for Element panels are included with Nucoda and Phoenix - users can customise mapping using the Tangent Mapper

installed with the Tangent Hub software


There are four control panels in an official set but we configure and use an extra Element-Bt panel (making five in total).

  • Element-Tk: Trackballs
  • Element-Mf: Multifunction
  • Element-Kb: Knob
  • Element-Bt: Button
  • Element-Bt: Button (additional button panel)

These five panels are the recommended and mapped configuration. You are able to use less than the recommended number of panels, but certain commands will have to be remapped manually.

The Tangent Panels require the Tangent Hub software to be downloaded and installed from the Tangent website.

Arc


Default mapping for Arc panels are included with Nucoda and Phoenix - users can customise mapping using the Tangent Mapper

installed with the Tangent Hub software


There are three control panels in the Arc

  • Arc - Navigation
  • Arc - Grading
  • Ac - Function

The Arc Panels require the Tangent Hub software to be downloaded and installed from the Tangent website and also require a hardware license

from Tangent


Wave / Wave 2 / Ripple


There is no default mapping for these panels but they all can be ,apped and used using the Tangent Mapper software and

 are fully compatible with Nucoda and Phoenix

Tangent HUB drivers


Older Digital Vision releases should work with the latest Tangent software. If you encounter problems, please contact Digital Vision support.


For downloads, see the Tangent support page.


ReleaseMapper HubNotes
2019.22.3.01.5.2
2019.12.1.41.4.8
2018.32.2.61.4.8
2018.2
2.2.6
1.4.8

2018.1
2.1.4
1.3.3
ARC Panel support - Improved support for Wave, Wave 2 and Ripple
2017.12.1.4
1.3.3



Tangent guides
2019.2 - Tangent Element Guide
2019.1 - Tangent Element Guide - Minor updates
2018.3 - Tangent Element Guide
2018.2 - Tangent Element Guide
2018.1 - Tangent Element Guide
Older  -  Tangent Element Guide